Sergio Sampaio Archi and Tectônica Set a Timber-Framed House on Stilts Above a Wooded Slope in Jacareí
In Jacareí's Paraíba Valley, a 440 m² house enters from a steel roof deck and descends through a glulam frame to a pool above the Jaguari reservoir.
Rouxinol House sits on a 2,000 m² plot in Jacareí, in the Paraíba Valley of São Paulo state, where the ground falls roughly 50 metres toward the Jaguari River reservoir. The site came with more than 300 surveyed trees and a fixed brief: keep the environmental impact low. Those three conditions, a steep drop, a dense canopy and a light footprint, gave the designers far less room to manoeuvre than the plot size suggests. The house is a collaboration between Sergio Sampaio Archi and Tectônica, and it spans 440 m² across three levels.
The interesting move is the inverted section. You arrive at the top, on a grated steel deck at road level that doubles as a carport and roof, then descend through the bedrooms to a living floor and pool at the bottom, which rest on a concrete base and slender pilotis. The building does not try to sit on the hillside. It stands slightly apart from it, a timber cage lowered between the trees. Most slope houses cut a platform and retain the earth behind it. This one keeps the earthworks small and lets the frame do the work.
Arriving on the Roof






From above, the house reads as a small rectangle cut out of an unbroken canopy, pressed against a dirt road. That is the first sign of discipline here. The footprint occupies a sliver of a long plot, and the parking, which usually claims its own patch of cleared ground, is folded onto the roof structure itself.
The steel grating deck is a smart choice for an arrival surface. It carries cars and people while letting light and rain pass through to the timber volume and slope below. From this level the reservoir and the layered hills open up immediately, so the view arrives before the house does. The aerials also show a mix of glazed and corrugated metal roofing, a practical palette that keeps the top of the building light.
A Frame Lifted Off the Slope






Seen from below, the logic reverses. The three-storey timber and glass volume rides on a concrete base, which in turn stands on thin pilotis above the falling ground. The result cantilevers out over the trees with a railed deck at its edge, and in the late light it looks more like a lantern hung in the forest than a house built into it.
We think the stilts are the real sustainability argument, more than any single material. Every column that touches the hillside instead of a continuous foundation means less excavation, fewer disturbed roots and a slope that keeps draining as it did before. The solar panels visible in the twilight aerial support the case, but the section makes it first.
The Grid as Facade



The front elevation is mostly structure. A timber grid organises the glazed bays, and vertical wood louvers cover parts of the upper levels where privacy or sun control matters. Bedrooms sit behind full-height glass and white curtains, stacked above the plunge pool and the concrete plinth.
This candour is the facade's strength. Nothing hides the frame, so the elevation tells you exactly how the building stands. The risk with this approach is a house that feels like a display case, and the louvers are what save it: they add depth and shadow to a surface that would otherwise be flat glass.
Descending Through the House





Because the entry is at the top, circulation becomes the main experience of the house. Open steel stairs with perforated treads and cable railings run beside timber-clad walls, and grated walkways continue the material language of the roof deck inside. Each flight ends at a window, so you are always walking toward the water.
The perforated treads cast patterned shadows across the floors, a small detail that keeps light moving through levels that could easily feel compressed. A cross-braced timber wall along the walkway shows the bracing openly, which suits a house that treats its structure as the main event.
Living Under the Beams




The lowest occupied floor holds an open living, dining and kitchen space under exposed beams and a pine ceiling. Sliding glass opens it to the lake and hills, and a single timber column with diagonal cables anchors the room. The stair floats behind that column, so the descent ends in plain view of the whole space.
Placing the shared rooms at the bottom gives them the deepest connection to the landscape and the most generous ceiling. The bedrooms above act as a buffer between the road and the family's daytime life. It is a sensible arrangement on a site where the road is the only neighbour.
The Pool Terrace






The covered terrace runs along a long, narrow pool, with timber columns and a plank ceiling extending the interior grid outward. In plan it appears as a blue strip along one edge of the living floor, which makes the water read as part of the room rather than a separate amenity set in a lawn.
The teal tiles and stone edges are restrained, and at dusk the uplit glulam columns frame the reservoir in regular bays. Setting the pool on the elevated concrete base, instead of digging it into the slope, follows the same low-intervention logic that runs through the whole house.
Where Timber Meets Steel





Up close, the hybrid construction becomes clear. Laminated timber columns meet crossing glulam beams at visible corner junctions, and slim steel tie rods angle off them, taking tension where timber alone would need bulk. Under the canopy, V-shaped steel struts carry the grated roof panels over a brick-paved walkway.
The division of labour is legible: timber for the inhabited frame, steel for the exposed and trafficked surfaces, concrete only where the building meets the ground. We would have liked to know more about the structural system, but the details make the intent plain. Each material does the job it does best, and you can see it doing that job.
Plans and Drawings




The site plan shows how modest the footprint is against the long, contoured plot running from street to water. The top level holds three parked cars and the stair head, the intermediate floor fits two bedrooms with bathrooms and a small sitting area beside a void, and the lower floor gathers living, kitchen and the pool strip. Read together, the drawings confirm the inverted section the photographs suggest.
Why This Project Matters
Rouxinol House offers a clear answer to a common problem in Brazil's wooded hinterlands: how to build on a steep, tree-heavy lot without bulldozing the qualities that made it worth buying. Its answer is to bring the road level onto the roof, stack the program downward and lift the whole frame on stilts, so the slope stays mostly as it was.
The house is not radical in its materials, and it does not need to be. Its value lies in the section, in how much of the site's environmental logic is solved with one structural and spatial decision before any green add-on enters the conversation. For architects working on difficult terrain, that ordering of priorities is the lesson worth taking away.
Rouxinol House by Sergio Sampaio Archi and Tectônica. Location: Jacareí, São Paulo, Brazil. Area: 440 m². Year: 2026. Photography: Manuel Sá.
About the Studio
Share Your Own Work on uni.xyz
If projects like this are the kind of work you want to make, uni.xyz is a place to publish your own, find collaborators, and enter design competitions.
Popular Articles
Popular articles from the community
Bokey Grant Wedges a Brick Lookout Tower into a Flame Zone Escarpment in the Southern Highlands
A double brick family home in New South Wales's Southern Highlands, reached by an 18 metre bridge and built to read as both watchtower and bunker.
Cambra Buró Sets a Kuwaiti Coastal Villa on a Sculpted Travertine Plinth and Lets the Upper House Float
In Abu Al Hasaniya, Kuwait, a 3,000 sqm seaside villa pairs a heavy stone base with clay, cork and walnut to work with the Gulf climate.
The Student Center As A Modular Space: A Timber Grid That Behaves Like a Street in Amsterdam
Shortlisted at Overseas Oasis 2020, a stacked wooden frame holds cafés, shops, studios and terraces in parts that can serve shifting demands.
Studio Andre Lenza Shrinks a Family Home into a Single-Storey Goiânia House Behind Timber Screens
A couple's move to a smaller home in eastern Goiânia becomes a single-storey concrete house wrapped in timber screens, around a plunge pool and garden.
Similar Reads
You might also enjoy these articles
LAVA Architecten Gives Vocational Education a Sawtooth-Roofed Face on a Mechelen School Campus
In Mechelen, Belgium, a 2,053 m² STEM school on a 6×6 m grid turns workshops and classrooms into rooms that can be rearranged as teaching changes.
KEMA Studio Turns a Derelict Marvila Attic into a 60 m² Lighthouse Apartment Above Lisbon
In Lisbon's Marvila district, a rebuilt roof, four skylights and two plywood volumes turn an unlivable attic into a bright home facing the Tagus.
Pixel Gardens: One Repeated Module Stacked Into a Terraced Social Housing Tower for Famagusta
Salem Bader's shortlisted housing tower builds a vertical neighbourhood from one repeated module, offsetting units to carve terraces, light and air.
Bao Huynh Watercolor Atelier: A Serene Art Retreat in Hội An
Bao Huynh Watercolor Atelier in Hội An blends multifunctional art spaces, sustainable design, local materials, and family-friendly living in a serene environment.
Explore Residential Building Competitions
Discover active competitions in this discipline
The International Standard for Design Portfolios
The Global Benchmark for Architecture Dissertation Awards
The Global Benchmark for Graduation Excellence
Challenge to design mud housing for contemporary communities
Comments (0)
Please login or sign up to add comments
No comments yet. Be the first to comment!