PHTAA Wraps a Thai Rice Bran Oil Refinery in Layered Corrugated Louvers That Breathe, Filter Light and Keep Birds OutPHTAA Wraps a Thai Rice Bran Oil Refinery in Layered Corrugated Louvers That Breathe, Filter Light and Keep Birds Out

PHTAA Wraps a Thai Rice Bran Oil Refinery in Layered Corrugated Louvers That Breathe, Filter Light and Keep Birds Out

UNI Editorial
UNI Editorial published Blog under Industrial Building, Transportation on

Factories rarely get the attention of architects, and when they do, the result is often a polished box with a logo on it. The LPP Rice Bran Oil Refinery by PHTAA takes a different route. Set in the open farmland of Khok Duea, in Thailand's Nakhon Sawan province, this 5,000 m² industrial building is wrapped in corrugated metal sheets, perforated steel and a plain steel frame. These are the materials of any agricultural shed in the region. What changes is how they are arranged.

The interesting part is not the material palette but the logic behind it. PHTAA treated the site's problems as the brief: heavy rain driven sideways by wind, intense sun, and birds that would happily nest inside a food processing plant. Instead of sealing the building into an opaque, mechanically cooled box, the architects built a layered envelope where each spaced metal element handles several of these problems at once. The result is a factory that breathes, admits soft light, and gives the people working inside a more comfortable place to spend their shifts.

A Pitched Silhouette in Flat Farmland

Elevated view of the corrugated metal factory with louvered facade, flanked by silver storage tanks under an overcast sky
Elevated view of the corrugated metal factory with louvered facade, flanked by silver storage tanks under an overcast sky
Aerial view of the pitched corrugated roofs and louvered facade, with tanks and a yellow crane beside wet ground
Aerial view of the pitched corrugated roofs and louvered facade, with tanks and a yellow crane beside wet ground
Aerial view of the louvered industrial tower and storage silos with flat farmland and distant hills under hazy sky
Aerial view of the louvered industrial tower and storage silos with flat farmland and distant hills under hazy sky

From above, the refinery reads as a cluster of pitched corrugated roofs and a taller louvered volume, set among silver storage tanks, a pipe bridge and a yellow crane. The surrounding landscape is almost completely flat, with fields running out to distant hills. In that setting any vertical industrial mass becomes a landmark, whether the designer intends it or not.

PHTAA does not fight this. The building keeps the familiar profile of a rural processing plant, but its striated skin gives it a texture that changes with the weather. Under an overcast sky the louvers flatten into a grey field; in sun they break into sharp bands of light and shadow. It is an industrial object that still fits alongside the silos rather than trying to outshine them.

The Louver as the Whole Argument

Close view of the angled corrugated metal louvers on a steel frame, with a tank and pipe bridge under blue sky
Close view of the angled corrugated metal louvers on a steel frame, with a tank and pipe bridge under blue sky
Angled metal louvers with ladder-like frames along the facade, with a cylindrical tank in the foreground under grey sky
Angled metal louvers with ladder-like frames along the facade, with a cylindrical tank in the foreground under grey sky
Frontal view of rows of horizontal corrugated louvers split by a single dark steel column below a plain cladding band
Frontal view of rows of horizontal corrugated louvers split by a single dark steel column below a plain cladding band

The facade is built from rows of angled corrugated metal blades carried on a steel frame. Seen frontally, the horizontal louvers form a dense, regular rhythm, interrupted only by a single dark column and capped by a plain band of cladding. From an oblique angle, the depth of the system becomes clear: ladder-like frames hold the blades away from the inner wall, creating a cavity rather than a single skin.

That cavity is the key move. Tilting the blades downward lets air pass while deflecting rain that arrives at an angle. It also stops direct sun from hitting the inner surface. A single sheet of corrugated metal does none of this. Several sheets, spaced and angled, do all of it, and you can read the performance just by looking at the section of the blade.

Detailing Ordinary Parts with Care

Close-up of corrugated metal louver blades held by slim diagonal struts on a mesh-backed steel frame
Close-up of corrugated metal louver blades held by slim diagonal struts on a mesh-backed steel frame
Close-up of corrugated metal louver blades in steel frames with mesh guards, casting sharp shadows in direct sunlight
Close-up of corrugated metal louver blades in steel frames with mesh guards, casting sharp shadows in direct sunlight

Up close, the components are modest: corrugated blades, slim diagonal struts, a mesh backing on a steel frame. Nothing here would surprise a local fabricator. The care shows in the proportions and the repetition. The struts are thin enough to disappear from a distance, and the mesh sits behind the blades as a continuous barrier.

That mesh does quiet but important work. In a food processing environment, birds are a hygiene problem, and the usual answer is to close every opening. Here the mesh keeps birds out of the production areas while leaving the envelope open to air and light. It is a good example of a cheap element solving an expensive problem.

Scale, Weather and Workers

Corner of the louvered industrial building reflected in a puddle, with workers gathered at its base beside silver tanks
Corner of the louvered industrial building reflected in a puddle, with workers gathered at its base beside silver tanks
Corner of the tall louvered factory building beside a steel silo, with utility poles and an overcast sky
Corner of the tall louvered factory building beside a steel silo, with utility poles and an overcast sky

Photographs taken at ground level bring the human scale back. Workers gather at the base of the louvered corner, the building is reflected in a puddle after rain, and utility poles and a steel silo sit beside the facade. These images remind us that this is a working plant, not an object built for the camera.

The wet ground matters too. This is a climate of torrential downpours, and the facade has to perform through them. The building's composure in those images, with no visible staining and no sealed-up openings, suggests the envelope is doing what it was designed to do.

Filtered Daylight from the Inside

Interior view of black steel columns and beams framing translucent angled louvers lit by daylight from outside
Interior view of black steel columns and beams framing translucent angled louvers lit by daylight from outside
Interior view of backlit angled louvers seen through dark steel columns and beams, with daylight filtering through the mesh
Interior view of backlit angled louvers seen through dark steel columns and beams, with daylight filtering through the mesh
View through steel frame and corrugated roofing edge onto dry fields and distant warehouses under an overcast sky
View through steel frame and corrugated roofing edge onto dry fields and distant warehouses under an overcast sky

Inside, the black steel columns and beams frame the louvers as a backlit screen. Daylight filters through the blades and mesh, arriving soft and indirect rather than as glare. For an industrial interior, that is a real change. Workers get natural light and a sense of the outside without the heat gain that a glazed wall would bring.

Views out are partial but present. Through the steel frame and the edge of the roof you can still see dry fields and distant warehouses. The building never fully cuts its occupants off from the landscape, which is the opposite of how most factories are planned.

A Translucent Hall That Glows at Dusk

Interior of an industrial hall with translucent corrugated wall panels glowing above dark steel bracing and pipework at dusk
Interior of an industrial hall with translucent corrugated wall panels glowing above dark steel bracing and pipework at dusk
Close-up of translucent corrugated panels divided by thin mullions and dark horizontal beams, fading from white to green
Close-up of translucent corrugated panels divided by thin mullions and dark horizontal beams, fading from white to green

Part of the envelope uses translucent corrugated panels instead of metal blades. At dusk, these walls glow above dark bracing and pipework, turning the hall into something close to a lantern. Close up, the panels shift from white to green between thin mullions and heavy horizontal beams.

This variation shows that PHTAA is not applying one solution everywhere. Where the program calls for more light, the skin becomes translucent; where it needs shading and rain protection, the louvers take over. The same corrugated profile runs through both, which keeps the building coherent.

Plans and Drawings

Exploded axonometric drawing of a tall translucent wall, with louvered panel layers pulled out in sections to the right
Exploded axonometric drawing of a tall translucent wall, with louvered panel layers pulled out in sections to the right
Exploded axonometric drawing of a tall facade slab with angled louver modules separated out as three detached units
Exploded axonometric drawing of a tall facade slab with angled louver modules separated out as three detached units
Exploded axonometric drawing of a narrow tower facade with stacked slanted louver units and two modules lifted away
Exploded axonometric drawing of a narrow tower facade with stacked slanted louver units and two modules lifted away
Axonometric drawing of a tall narrow facade strip with stacked angled louvers and a dark vertical-slatted band at the top
Axonometric drawing of a tall narrow facade strip with stacked angled louvers and a dark vertical-slatted band at the top
Axonometric drawing of a facade panel with a grid of shelf-like louvers, a stepped upper edge and a plain lower section
Axonometric drawing of a facade panel with a grid of shelf-like louvers, a stepped upper edge and a plain lower section
Detail axonometric drawing of angled corrugated metal louvers, mesh walkway grating and steel brackets, with the right half faded out
Detail axonometric drawing of angled corrugated metal louvers, mesh walkway grating and steel brackets, with the right half faded out
Isometric drawing of the stepped building volume with red elevation markers and exploded facade panel details pulled out along two sides
Isometric drawing of the stepped building volume with red elevation markers and exploded facade panel details pulled out along two sides

The drawing set is almost entirely about the envelope, which tells you where the design effort went. Exploded axonometrics pull louver modules away from tall facade slabs, showing them as repeatable units that can be stacked, lifted and replaced. One drawing isolates the translucent wall, separating its panel layers; others show the narrow tower facade with its slanted units and a vertical-slatted band at the top.

The detail axonometric is the most useful. It shows the angled corrugated blades, the mesh walkway grating and the steel brackets together, making clear that the facade cavity also works as a service zone. The isometric of the full stepped volume, with elevation markers and panels peeled out along two sides, ties the module logic back to the overall form.

Why This Project Matters

Most industrial buildings in Southeast Asia are designed by engineers to a cost, and the default answer to climate is to close the building and add machines. The LPP Rice Bran Oil Refinery argues that the same budget materials, assembled with more thought, can give better daylight, natural ventilation and protection from rain and birds. That is a practical argument, not a stylistic one, and it is easy to repeat.

We think the lesson extends beyond factories. PHTAA shows that performance can come from arrangement rather than from new products: spacing, angle and layering do the work. For architects facing tight budgets and harsh climates, the refinery is a reminder that the ordinary corrugated sheet still has a lot to offer when you ask it to do more than one job.


LPP Rice Bran Oil Refinery by PHTAA, Khok Duea, Thailand. Area: 5,000 m². Completed: 2026. Photography by Kukkong Thirathomrongkiat.


About the Studio

Share Your Own Work on uni.xyz

If projects like this are the kind of work you want to make, uni.xyz is a place to publish your own, find collaborators, and enter design competitions.

UNI Editorial

UNI Editorial

Where architecture meets innovation, through curated news, insights, and reviews from around the globe.

Share your ideas with the world

Share your ideas with the world

Write about your design process, research, or opinions. Your voice matters in the architecture community.

Comments (0)

No comments yet. Be the first to comment!

Similar Reads

You might also enjoy these articles

publishedBlog1 month ago
LAVA Architecten Gives Vocational Education a Sawtooth-Roofed Face on a Mechelen School Campus
publishedBlog1 month ago
KEMA Studio Turns a Derelict Marvila Attic into a 60 m² Lighthouse Apartment Above Lisbon
publishedBlog1 month ago
Pixel Gardens: One Repeated Module Stacked Into a Terraced Social Housing Tower for Famagusta
publishedBlog3 months ago
Bao Huynh Watercolor Atelier: A Serene Art Retreat in Hội An

Explore Industrial Building Competitions

Discover active competitions in this discipline

UNI Editorial