BLT Arquitectos Wraps a Shared Innovation Hub at Córdoba's Catholic University in a Glowing Polycarbonate Shed
On the Universidad Católica de Córdoba campus in Argentina, a 650 m² workshop hall in polycarbonate and concrete serves every faculty as one shared room.
The Universidad Católica de Córdoba grew in the conventional way: one academic unit, one building. The campus that results is a set of territories, each faculty with its own entrances, its own corridors and its own sense of who belongs. The HUB UCC, a 650 m² innovation space completed in 2025 by BLT Arquitectos, does not belong to any single faculty. It is a long, low shed among the pines that any student can walk into, and its architecture is built to make that openness visible.
What interests us is how little the building does to achieve this. It has a pitched standing-seam roof, a clerestory, translucent polycarbonate walls, raw concrete ends and exposed steel trusses. It is closer to an agricultural or industrial shed than to a flagship innovation center. The restraint is deliberate. A cheap, light and legible enclosure tells students that the room is for making things, that mess is expected, and that nobody needs permission to use it.
A Shed Set Among the Pines






In daylight the hub reads as one horizontal line: a long frosted wall under a single roof plane, set on an open lawn with mature trees around it. BLT keeps the volume low and avoids the urge to make it monumental. The building sits beside the existing campus fabric without competing with the faculty buildings around it, and that suits a program meant to sit between disciplines.
The trees do real work here. Pines along the street side and bare deciduous trunks near the entrances filter views of the building, so it reads less as an object and more as part of the landscape. From the road it looks like a pale band behind tree trunks, which is a modest way for an institution to present its newest facility.
Polycarbonate as Lantern



After dark the building changes character. The corrugated polycarbonate turns into a diffuse light box, and the silhouettes of people at their tables show through the skin without full transparency. This is the main argument of the project. A glass box would expose everything, and a solid box would hide everything. Translucency sits in between: it shows that the room is in use and invites you in without putting anyone on display.
The glazed end facade is fully transparent and works as a front door that is easy to read at twilight. The long sides stay soft. That split between a clear threshold and a filtering envelope does a lot with a very limited palette of materials.
Concrete Ends, Light Skin



The raw concrete walls give the project its weight. They anchor the corners of the light structure and meet the sloped roof edge in a sharp, simple junction. Against the polycarbonate, the concrete reads as permanent and the skin reads as replaceable. That is an honest way to build an innovation space, since its uses will almost certainly change over the next decade.
The bare trees full of bird nests show up in nearly every exterior view, and they give the photographs a seasonal, slightly rough quality. The building does not tidy up its surroundings. It accepts the campus as it is.
Clerestory and Skin Detail





Up close, the envelope is a kit of parts: corrugated translucent panels, bolted horizontal rails, vertical steel mullions and exposed diagonal bracing visible through the skin at night. Nothing is concealed. The clerestory band under the roof overhang brings clear light in high, above the frosted wall, so occupants see sky and branches while the working zone stays evenly lit and free of glare.
We would have liked to know more about how the envelope performs through Córdoba's hot summers and cool winters, since polycarbonate sheds can struggle with heat gain. The deep overhang and the high clerestory suggest the architects thought about solar control, but the skin's thermal behavior is still the question this type of building has to answer.
One Long Room for Making






Inside, the hall is a single continuous workshop under regularly spaced steel trusses. Long plywood tables run down the floor with grey chairs, shelving, ductwork and a dust extraction unit. Students cut, glue and assemble in the open. The open central bay of the facade lets the room extend toward the lawn, and in one view a pickup truck sits right at the far end, which tells you this is a space for loading materials in and carrying prototypes out.
The interior is rough, and that is its strength. Plywood furniture, exposed services and fluorescent lighting mean nobody worries about scratching a finish. For a program that wants architecture, engineering and business students working side by side, a space that tolerates damage does more for collaboration than any branded interior.
Meeting Rooms, Printers and Round Tables




Not everything happens at the bench. Timber-framed glazed meeting rooms sit along the hall, giving acoustic separation while keeping the line of sight across the workshop. A curved plywood table in front of them sets up a looser zone, with printers and 3D printers close at hand. Round wooden tables near timber cabinets bring the scale down for conversation, warmed by low evening light coming through the translucent wall.
The gradient from heavy making to small meetings happens within one volume and needs no corridors. That is the opposite of the faculty building model the campus grew up with, and the plan works as a quiet critique of it.
Plans and Drawings









The site plan shows the hub as a single solid bar among the grey campus blocks, roads and parking. The axonometric pairs it with a second sloped-roof building across a street, which suggests the project is meant to work as part of a small ensemble rather than as a standalone object. The roof plan adds a perimeter walkway around a lawn and accessible parking, so the landscape is treated as part of the program.
The hand sketch explains the logic most clearly: two upright bars labeled services and one horizontal bar labeled installations, laid on a dashed grid. The floor plan follows it, with service cores pushed to the sides so the hall stays clear. The longitudinal section shows regular columns, the clerestory and a small enclosed volume at one end, and the cross section shows the single roof plane rising over the tall glazed wall. The elevations confirm how disciplined the composition is: a paneled base, a clerestory band and a tilted roof.
Why This Project Matters
Universities everywhere are building innovation hubs, and many of them end up as expensive showpieces that look good in a prospectus and feel off-limits to undergraduates. BLT Arquitectos takes the opposite approach. A low-cost shed with a translucent skin, exposed structure and services pushed to the edges gives you a room that says use me rather than admire me. On a campus organized by faculty, a building that belongs to everyone needs that kind of humility.
The project also shows how far a limited palette can go when every material has a clear role: concrete for anchoring, polycarbonate for diffusing light, clear glass for thresholds, plywood for everything you touch. Whether the skin holds up to Córdoba's climate over time is a fair question. As a model for shared, interdisciplinary space on a mid-sized campus, though, the HUB UCC is a strong and replicable precedent.
HUB UCC, Universidad Católica de Córdoba Innovation Space by BLT Arquitectos. Location: Universidad Católica de Córdoba campus, Córdoba, Argentina. Area: 650 m². Year: 2025. Photography: Gonzalo Viramonte.
About the Studio
Share Your Own Work on uni.xyz
If projects like this are the kind of work you want to make, uni.xyz is a place to publish your own, find collaborators, and enter design competitions.
Popular Articles
Popular articles from the community
andblack design studio Wraps a Three-Generation Ahmedabad Home Around a Planted, Skylit Central Courtyard
In Ahmedabad, a 9,910 sq ft house uses exposed concrete, brick jali and a skylit green court to give three generations both distance and closeness.
REAL Architects and Challenge Design Plant a Timber Gridshell Seed at the Heart of Shanghai's West Bund
On Shanghai's Xuhui Waterfront, a 230 m² glazed timber lattice dome anchors a terraced garden and lets its structure do all the talking.
Cambra Buró Sets a Kuwaiti Coastal Villa on a Sculpted Travertine Plinth and Lets the Upper House Float
In Abu Al Hasaniya, Kuwait, a 3,000 sqm seaside villa pairs a heavy stone base with clay, cork and walnut to work with the Gulf climate.
The Student Center As A Modular Space: A Timber Grid That Behaves Like a Street in Amsterdam
Shortlisted at Overseas Oasis 2020, a stacked wooden frame holds cafés, shops, studios and terraces in parts that can serve shifting demands.
Similar Reads
You might also enjoy these articles
LAVA Architecten Gives Vocational Education a Sawtooth-Roofed Face on a Mechelen School Campus
In Mechelen, Belgium, a 2,053 m² STEM school on a 6×6 m grid turns workshops and classrooms into rooms that can be rearranged as teaching changes.
KEMA Studio Turns a Derelict Marvila Attic into a 60 m² Lighthouse Apartment Above Lisbon
In Lisbon's Marvila district, a rebuilt roof, four skylights and two plywood volumes turn an unlivable attic into a bright home facing the Tagus.
Pixel Gardens: One Repeated Module Stacked Into a Terraced Social Housing Tower for Famagusta
Salem Bader's shortlisted housing tower builds a vertical neighbourhood from one repeated module, offsetting units to carve terraces, light and air.
Bao Huynh Watercolor Atelier: A Serene Art Retreat in Hội An
Bao Huynh Watercolor Atelier in Hội An blends multifunctional art spaces, sustainable design, local materials, and family-friendly living in a serene environment.
Explore Architecture Competitions
Discover active competitions in this discipline
The International Standard for Design Portfolios
The Global Benchmark for Architecture Dissertation Awards
The Global Benchmark for Graduation Excellence
Challenge to design a portable theatre
Comments (0)
Please login or sign up to add comments
No comments yet. Be the first to comment!